Salmon River Bench

Site Name

Primary: Salmon River Bench

---

Commodity

Primary: Gold
Secondary: Mercury
Secondary: Chromium
Secondary: Diamond

---

Location

State: Alaska
District: Goodnews Bay

---

Land Status

Not available

---

Holdings

Not available

---

Workings

Not available

---

Ownership

Not available

---

Production

Not available

---

Deposit

Record Type: Site
Operation Category: Producer
Operation Type: Unknown
Years of Production:
Organization:
Significant:

---

Physiography

Not available

---

Mineral Deposit Model

Model Name: Placer PGE-Au

---

Orebody

Not available

---

Structure

Not available

---

Alterations

Not available

---

Rocks

Not available

---

Analytical Data

Not available

---

Materials

Ore: Tetraferroplatinum
Ore: Cinnabar
Ore: Diamond
Ore: Gold
Ore: Mercury
Ore: Sperrylite
Ore: Iron
Ore: Platinum
Ore: Osmium
Ore: Iridium
Ore: Chromite

---

Comments

Comment (Production): Production Notes = A significant part of the estimated 650,000 ounces of PGM and 15,600 ounces of gold produced from the Salmon River area placers (Cobb, 1980 [OF 80-909]) was recovered from the Salmon River bench placer.

Comment (Exploration): Status = Active

Comment (Workings): Workings / Exploration = Dredge mining, started on Salmon River in 1937, has taken place from opposite the mouth of Dowry Creek to the north (surface elevation of about 275 feet) south 2 miles to opposite the mouth of Platinum Creek (surface elevation about 175 feet). The area of dredge tailings is commonly 600 to 700 feet wide. Drilling has delineated the extensions of the bench placer deposit southward to within 3/4 mile of the mouth of Salmon River on Kuskokwim Bay. It becomes deeper and apparently uneconomic to the south.

Comment (Geology): Age = Quaternary.

Comment (Reference): Primary Reference = Mertie, 1969

Comment (Geology): Geologic Description = Dredge mining of the Salmon River Bench has taken place from opposite the mouth of Dowry Creek on the north (surface elevation of about 275 feet), south 2 miles to opposite the mouth of Platinum Creek (surface elevation about 175 feet). The area of dredge tailings is commonly 600 to 700 feet wide. The paystreak is on weathered bedrock, in the overlying 10 feet of clay and gravel, and in fractured bedrock. It has been traced by drilling for a distance of about 10 miles, to within 3/4 mile of the coast; it is 600 feet to as much as 1,000 feet wide in places. The bedrock bench does not contain local incisions and has a general dip to the south. As a result, overburden thickness changes from as little as 15 feet at the north end of the paystreak to more than 200 feet within a mile of the mouth of Salmon River. The unconsolidated deposits on this bench are clay and about 20 percent gravel, which forms lenses and streaks as much as 70 feet thick. The gravels contain commonly faceted, subangular to rounded pebbles and cobbles coated with clay; the clay makes recovery of PGM grains difficult (Mertie, 1969, p. 82). Non-siliceous pebbles and cobbles are decomposed. Unlike other unconsolidated deposits in placer mines of the Salmon River area, some layers in the bench overburden are frozen. South of Happy Creek, the upper part of the overburden locally is thick, clean, and little-weathered gravel (Mertie, 1976, p. 32). Five samples of the bench tailings contained PGM contents from below detection to 0.0024 ounce per cubic yard (Fechner, 1988, p. 191-192). PGM grains from Salmon River valley and bench tailings contain 0.6 to 1.1 percent Rh, 0.4 to 0.7 percent Ru, 60.3 to 85.5 percent Pt, 3.8 to 25.6 percent Ir, 1.2 to 6.3 percent Os, and 5.9 to 8.9 percent Fe (Fechner, 1988, p. 81). The PGM-bearing phases identified in these samples included iron-platinum alloy containing 8 to 30 percent Fe; iron-platinum alloy with minor osmiridium inclusions; and osmiridium, sperrylite, and tetraferroplatinum (Fechner, 1988, p. 81). Small amounts of cinnabar and traces of native mercury have been identified in dredge concentrates (Mertie, 1976, p. 38). Two small diamonds were identified in the nondissolved residue from 8 PGM granules (Mertie, 1976, p. 17). This placer is spatially removed from the Red Mountain ultramafic pluton on the west side of Salmon River valley, from which many younger alluvial placers have been derived (eg. HG010, HG011, HG013, HG014, and HG027). Some higher and older bench remnants exist along the east side of Salmon River valley and reworking of these deposits has contributed to the Salmon River bench placer. In general, it appears that the Salmon River bench placer has a long and complicated history. Its proximity to the coastline and low elevation (in places actually below present sealevel), suggests that Quaternary sea level changes could have influenced its development.

Comment (Deposit): Model Name = Placer PGE-Au (Cox and Singer, 1986; model 39b)

Comment (Reserve-Resource): Reserves = Fechner (1988, p. 81) lists measured and indicated reserve estimates from private company files that total over 63 million cubic yards with grades ranging from 0.0017 to 0.0084 ounce of PGM per cubic yard.

---

References

Reference (Deposit): Cobb, E.H., 1972, Metallic mineral resources map of the Hagemeister Island quadrangle, Alaska: U.S. Geological Survey Miscellaneous Field Studies Map MF-362, 1 sheet, scale 1:250,000.

Reference (Deposit): Mertie, J.B., Jr., 1969, Economic geology of platinum minerals: U.S. Geological Survey Professional Paper 630, 120 p.

Reference (Deposit): Cobb, E.H., 1980, Summaries of data and lists of references to metallic and selected nonmetallic mineral deposits in fifteen quadrangles in southwestern and west-central Alaska: U.S. Geological Survey Open-File Report 80-909, 103 p.

Reference (Deposit): Fechner, S.A., 1988, Bureau of Mines mineral investigation of the Goodnews Bay mining district, Alaska: U.S. Bureau of Mines Open-File Report 1-88, 230 p.

---

The Top Ten Gold Producing States

These ten states contributed the most to the gold production that built the West from 1848 through the 1930s. The Top Ten Gold Producing States.