The Idaho is a lead, copper, silver, tin, and zinc mine located in Alaska.
About the MRDS Data:
All mine locations were obtained from the USGS Mineral Resources Data System. The locations and other information in this database have not been verified for accuracy. It should be assumed that all mines are on private property.
Mine Info
Elevation:
Commodity: Lead, Copper, Silver, Tin, Zinc
Lat, Long: 65.447, -167.17700
Map: View on Google Maps
Satelite View
MRDS mine locations are often very general, and in some cases are incorrect. Some mine remains have been covered or removed by modern industrial activity or by development of things like housing. The satellite view offers a quick glimpse as to whether the MRDS location corresponds to visible mine remains.
Idaho MRDS details
Site Name
Primary: Idaho
Commodity
Primary: Lead
Primary: Copper
Primary: Silver
Primary: Tin
Primary: Zinc
Secondary: Tungsten
Secondary: Fluorine-Fluorite
Location
State: Alaska
District: Port Clarence
Land Status
Not available
Holdings
Not available
Workings
Not available
Ownership
Not available
Production
Not available
Deposit
Record Type: Site
Operation Category: Prospect
Operation Type: Unknown
Years of Production:
Organization:
Significant:
Physiography
Not available
Mineral Deposit Model
Model Name: Sn skarn
Orebody
Not available
Structure
Not available
Alterations
Alteration Text: All of the veining in the area can be considered a type of alteration in the outer fringes of a significant hydrothermal system. This includes fluorite, laminar magnetite-fluorite-idocrase, and the sulfide-rich veins. Dolomitization is also locally devloped but it is not known how this is related to mineralization.
Rocks
Not available
Analytical Data
Not available
Materials
Ore: Cassiterite
Ore: Chalcopyrite
Ore: Galena
Ore: Sphalerite
Ore: Stannite
Gangue: Pyrite
Gangue: Magnetite
Gangue: Idocrase
Gangue: Fluorite
Gangue: Calcite
Gangue: Pyrrhotite
Comments
Comment (Deposit): Model Name = Skarn, vein, and replacement in limestone. Tin skarn (model 14b) and/or replacement tin (model 14c) model of Cox and Singer (1986) may be applicable
Comment (Deposit): Model Number = 14b, 14c
Comment (Reserve-Resource): Reserves = Not defined
Comment (Workings): Workings / Exploration = One dozer trench, a surface soil geochemical survey, outcrop geologic mapping and sampling, an airborne magnetic survey, a ground magnetic survey, and one vertical 983-foot diamond drill hole have been completed on the prospect.
Comment (Reference): Primary Reference = Hudson, 1983; Hudson, 1990; Drechsler, 1995
Comment (Geology): Age = The age of the mineralization is assumed to be related to the development of tin systems in the Lost River area and therefore Late Cretaceous, the age of the tin-mineralizing granites there (Hudson and Arth, 1983).
Comment (Geology): Geologic Description = drilled in 1995 to test this interpretation. This drill hole was collared slightly east of the sulfide vein exposed in the dozer trench. It reached a total depth of 983 feet (Drechsler, 1995). It encountered sulfide-bearing veins, veinlets, and disseminations in the upper 100 feet including one interval between 40.5 and 45 feet that contained up to 50% massive pyrrhotite and chalcopyrite. Steep dipping magnetite-calcsilicate veins and veinlets, less than 1 inch wide and commonly less than 0.25 inch wide, are common below 100 feet. These appear to increase in intensity below 500 feet including two intervals (640 to 678 feet and 938 to the bottom of the hole) that are stockworks. Fluorite-bearing veins are scattered through the hole but appear to be more abundant at depth. Two thin (0.25 and 0.75 inch wide) felsic dikes are present between 910 and 930 feet. The sulfide-rich interval between 40.5 and 45 feet assayed 1.74% copper, 2.2% zinc, 16 ppm silver, 3.79% CaF2, 250 ppm tin, and 55 ppm tungsten. Other selected intervals in the hole were anomalous in base metals, tin, and tungsten but significant grades were not intercepted. Two five-foot samples representing the interval between 432 and 442 feet contained 340 and 650 ppm tin and 540 and 320 tungsten; a sample representing the 715 to 720 foot interval contained 11% fluorite, 160 ppm tin, and 375 ppm tungsten; and two five-foot samples representing the interval between 818 and 828 feet contained 10 and 11% fluorite, 520 and 640 ppm tin, and 480 and 510 ppm tungsten.
Comment (Exploration): Status = Active
Comment (Geology): Geologic Description = The Idaho prospect is on a low bench (about 200 feet elevation ) on the east bank of Lost River. Here Ordovician limestone in the hanging wall of the Rapid River fault is locally exposed along cut banks of Lost River and its east tributary Tin Creek. Extensive fluorite veining in the limestone merges northward across Tin Creek to that exposed in the Lost River Valley prospect. The original Idaho prospect was a small area of chalcopyrite-pyrrhotite-fluorite mineralization exposed on the east bank of Lost River (Knopf, 1908). Sainsbury noted the presence of tin, sulfide minerals, and fluorite (1969, plate 1) and of beryllium rock and sulfides in this general area (1969, plate 5). Three types of mineralization are present here (Hudson, 1990): (1) fluorite and beryllium-bearing veins and replacements in dolomite; (2) magnetite-fluorite-idocrase (?) replacement veins (laminar skarn or wrigglite) along fractures in the carbonate rocks; and (3) sulfide-rich veins (and replacements?). Dolomite outcrops along the south side of lower Tin Creek contain irregularly sheeted fluorite veins. Individual veins are up to 3 inches wide and zones up to 1 foot wide can have up to 20 thin veinlets. Channel and grab samples of this mineralization contain up to 19% fluorine and 0.023 to .063 % beryllium. The presence of 0.023% beryllium in 4-foot wide zones containing sparse fluorite veins suggests that some of the mineralization is disseminated. Laminar magnetite-fluorite-idocrase (?) replacement veins (wrigglite) are common in outcrop along the east bank of Lost River. These veins, which vary from hairline seams to 3 feet wide, contain elevated tin, tungsten, beryllium, fluorine, base-metal, and silver. Five samples (Hudson 1983; 1990) contained 0.14 to 0.36% tin, 0.06 to 0.26% tungsten, 0.012 to 0.029% beryllium, 13 to 15% fluorine, and 0.3 to 4.7 ppm silver. Zinc, determined in only one of these samples, was 1.05%. Highly oxidized sulfide-rich mineralization is present in a vein exposed in a dozer trench on the east bank of Lost River. The trench exposes a 4-foot wide oxidized zone that strikes northeast and dips south. Sulfide remnants in this zone are massive pyrrhotite-chalcopyrite-sphalerite rock with minor constituents such as fluorite. Four sulfide-rich samples contained up to 0.19% tungsten, 0.64 to 3.72% copper, 0.14 to 14.3% zinc, 5 to 35 ppm silver, and weakly anomalous tin and lead (Hudson, 1983; 1990). Airborne and ground magnetometer surveys show that a large, 600+ gamma positive magnetic anomaly is centered on the Idaho prospect area. This feature combined with the widespread surface mineralization and alteration, the results of a soil geochemistry survey, and structural setting (interpreted to be in a downdropped hanging wall block of the Rapid River fault) suggests the presence of significant skarn and/or replacement mineralization at depth (Hudson, 1983; 1990). A vertical diamond drill hole was
References
Reference (Deposit): Cobb, E.H., 1975, Summary of references to mineral occurrences (other than mineral fuels and construction materials) in the Teller quadrangle, Alaska: U.S. Geological Survey Open-File Report 75-587, 130 p.
Reference (Deposit): Sainsbury, C.L., 1969, Geology and ore deposits of the central York Mountains, western Seward Peninsula, Alaska: U.S. Geological Survey Bulletin 1287, 101 p.
Reference (Deposit): Cobb, E.H., and Sainsbury, C.L., 1972, Metallic mineral resource map of the Teller quadrangle, Alaska: U.S. Geological Survey Miscellaneous Field Studies Map MF-426, 1 sheet, scale 1:250,000.
Reference (Deposit): Sainsbury, C.L., 1972, Geologic map of the Teller quadrangle, Seward Peninsula, Alaska: U.S. Geological Survey Map I-685, 4 p., 1 sheet, scale 1:250,000.
Reference (Deposit): Hudson, T.L., and Arth, J. G., 1983, Tin-granites of Seward Peninsula, Alaska: Geological Society of America Bulletin, v. 94, p. 768-790.
Reference (Deposit): Drechsler, J.S., Jr., 1995, Diamond drill hole summary (hole 1), Idaho prospect at Lost River, Seward Peninsula, Alaska: Anchorage, Alaska, unpublished report to Barbara Winkley, 14 p.
Reference (Deposit): Knopf, Adolph, 1908, Geology of the Seward Peninsula tin deposits, Alaska: U.S. Geological Survey Bulletin 358, 71 p.
Reference (Deposit): Hudson, T.L., 1990, The Idaho deposits, Seward Peninsula, Alaska: Anchorage, Alaska, unpublished report to Barbara Winkley.
Reference (Deposit): Hudson, T.L., 1983, Interim report on the Lost River district, Seward Peninsula, Alaska: Anchorage, Alaska, Anaconda Minerals Company internal report (Report held by Cook Inlet Region, Inc., Anchorage, Alaska).
The Top Ten Gold Producing States
These ten states contributed the most to the gold production that built the West from 1848 through the 1930s. The Top Ten Gold Producing States.